User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
infiNET devices are listed with the Net ID of the gateway to which they
are connected.
Newly acquired infiNET devices that have not been assigned MNET IDs
will be displayed with the MNET ID value of 01. All newly acquired
infiNET devices (except for C2N-MNETRPT devices) will be displayed
with a
icon.
Newly acquired repeater devices such as the C2N-MNETRPT will be
displayed with an MNET ID value of 01 and a
icon. Even though the
MNET ID is 01, repeaters will not cause error messages, report multiple
devices at the same MNET ID, or cause Toolbox to mark the devices in
the Network Device Tree as having an invalid MNET ID number.
Once all devices are acquired, MNET IDs must be assigned. Refer to
each device type’s Operations Guide for instructions on setting MNET
IDs.
Releasing infiNET Devices
Devices can be released from a gateway by using the “MNET Gateway”
window.
To release an infiNET device from the “MNET Gateway” window:
1. Open the “MNET Gateway” window by right-clicking the Net ID
of the gateway in the Network Device Tree and selecting
Functions | MNET Gateway….
2. Select the device(s) to be released and click Release Selected. The
device(s) will be released from the gateway. Reacquire the device
if desired.
Devices can also be released from a gateway at the device. Refer to the
infiNET device’s Operations Guide.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 19