User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver

Programming Software

Have a question or comment about Crestron software?

Answers to frequently asked questions (FAQs) can be viewed in the

Online Help section of the Crestron website. To post your own question

or view questions you have submitted to Crestron’s True Blue Support,

. First-time users will need to

establish a user account.

Setup is easy thanks to Crestron’s Windows



-based programming

software. Crestron’s D3 Pro software or SystemBuilder software can

create a complete project, with no special programming required. While

traditional programming tools can still be used to program a system, D3

Pro and SystemBuilder can be used to easily complete all necessary

programming for a base system including all touchpanel screens and the

control system program. The program output of D3 Pro and

SystemBuilder is a SIMPL Windows program with much of the

functionality encapsulated in macros and templates. Once D3 Pro and/or

Systembuilder creates the project, the system interfaces and program

logic can be customized in D3 Pro and/or Systembuilder or can be easily

modified with Crestron development tools (i.e., SIMPL Windows and

Crestron VisionTools

Pro-e (VT Pro-e) software packages).

D3 Pro and SystemBuilder come with templates for all supported

interfaces. If a user wishes to create a touchpanel project using templates

with a different look-and-feel, this can be accomplished by making a

custom template. This custom template can then be used by D3 Pro or

SystemBuilder to create the final project files to be loaded into the

panels. Alternatively, VT Pro-e can be used to tweak projects created

with the D3 Pro and/or SystemBuilder or develop original touchpanel

screen designs.

NOTE: Crestron recommends the use of D3 Pro or SystemBuilder for

programming an infiNET system.

Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 21