User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
Earliest Version Software Requirements for the
PC
NOTE: Crestron recommends that you use the latest software to take
advantage of the most recently released features. The latest software is
available from the Crestron website.
The following are the minimum recommended software versions for the
PC running Windows XP or Windows 2000:
• SIMPL Windows version 2.06.20 or later with library update file
352 or later. Requires SIMPL+ Cross Compiler version 1.1 or
later.
• Crestron Toolbox 1.02.06 or later.
• Crestron Database version 17.3.3 or later. Required by SIMPL
Windows.
• (Optional) D3 Pro version 1.5 or later. Also requires:
o D3 Pro Templates 1.0 or later.
o VisionTools Pro-e 3.3.4.0 or later.
o Engraver 2.2.2.3 or later.
o CUZ 3.154 for 2 Series processors or later.
• (Optional) SystemBuilder version 2.0 or later with SystemBuilder
Templates version 2.0.1or later. Also requires:
o VisionTools Pro-e 3.3.4.0 or later.
o Engraver 2.4.1.2 or later.
o CUZ 3.154 for 2 Series processors or later.
Programming with D3 Pro & SystemBuilder
The easiest
method of
p
rogram-
ming, but
does not
offer as
much
f
lexibility as
SIMPL
Windows.
D3 Pro and SystemBuilder offer automatic programming for such
residential and commercial applications as audio distribution, home
theater, video conferencing, and lighting. The interface of this tool guides
you through a few basic steps for designating rooms and specifying the
control system, touchpanels, devices, and functionality. D3 Pro and
SystemBuilder then program the system, including touchpanel projects
and control system logic.
22 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317