User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
D3 Pro and SystemBuilder are fully integrated with Crestron's suite of
software development tools, including SIMPL Windows, VT Pro-e, and
the Crestron Database. D3 Pro and SystemBuilder access these tools
behind the scenes, enabling you to easily create robust systems.
Programming with SIMPL Windows
The C2N-MNETGW does not require any specific programming other
than placing it in the SIMPL Windows program.
A program can be created that includes a C2N-MNETGW and infiNET
devices using the Crestron programming tool SIMPL Windows.
NOTE: The following assumes that the reader has knowledge of SIMPL
Windows. If not, refer to the extensive help information provided with
the software.
NOTE: The following are acceptable file extensions for programs that
include a C2N-MNETGW, developed for specific control system types:
.smw: projectname.smw (SIMPL Windows source file)
.spz: projectname.spz (compiled file for 2-series)
NOTE: In the following description, the PAC2 control system is used.
SIMPL Windows is Crestron's software for programming Crestron
control systems. It provides a well-designed graphical environment with
a number of workspaces (i.e., windows) in which a programmer can
select, configure, program, test, and monitor a Crestron control system.
SIMPL Windows offers drag and drop functionality in a familiar
Windows
®
environment.
This section describes a sample SIMPL Windows program that includes a
C2N-MNETGW gateway.
Configuration Manager is where programmers “build” a Crestron control
system by selecting hardware from the Device Library. In Configuration
Manager, drag the PAC2 from the Control Systems folder of the Device
Library and drop it in the upper pane of the System Views. The PAC2
with its associated communication ports is displayed in the System Views
upper pane.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 23