User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
NOTE: The first C2N-MNETGW in a system is preset with a Net ID of
0F when its symbol is dragged into the upper pane of System Views.
Additional units are assigned different Net ID numbers as they are added.
Setting the Net ID in Device Settings
Double-click the C2N-MNETGW icon to open the “Device Settings”
window. This window displays the gateway device information. If
necessary, select the Net ID tab to change the Net ID, as shown in the
following figure.
“Device Settings” Window for the C2N-MNETGW
NOTE: SIMPL Windows automatically changes Net ID values of a
device added to a program if a duplicate device or a device with the same
default Net ID already exists in the program. Always ensure that the
hardware and software settings of the Net ID match. For Net ID hardware
settings details, refer to “Identity Code” on page 10.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 25