User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
“Address Book” Window – Serial Setup
4. After setting the correct parameters, click OK to return to the
Crestron Toolbox main window.
5. Click Tools | Network Device Tree, or click the Network Device
Tree icon
to display the devices in the system. Select the entry
for the control system or Serial on COM1 from the drop down list
if it is not already selected. If communication is successful, the
network devices that are connected to the control system are
displayed.
Network Device Tree
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 29