User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
To view a specific device, expand the Network Device Tree by
clicking +. Expand the Network Device Tree until the device to be
managed is selected. Right-click the desired Net ID to open the
sub-menu. This menu provides a wide range of functions,
including; change the Net ID, open text console, upload project,
update firmware, etc.
Network Device Tree Sub-Menu-Functions
NOTE: Toolbox displays a customized list of functions depending on
the type of device with which it is communicating.
Troubleshooting Communications
Use the following checklist if communication cannot be established with
the control system.
1. Verify that the correct cables are used. Refer to the control systems
Operations Guide for information about RS-232 cables.
30 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317