User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
2. With a serial connection, verify that the correct COM port on the
PC has been selected. Some computers have more than one COM
port; some may be internal (e.g., for a modem). Consult the
manufacturer’s documentation for further information about the
COM ports on your PC.
3. Remove and reapply power to the control system.
4. If communication still cannot be established, contact Crestron
customer service.
Uploading a SIMPL Windows Program
The SIMPL Windows file can be uploaded to the control system using
SIMPL Windows or via Crestron Toolbox.
Upload via SIMPL Windows
1. Start SIMPL Windows.
2. Select File | Open to view the “Open” window, navigate to the
SIMPL Window file (.smw), and click Open.
3. Select Project | Transfer Program.
Upload via Crestron Toolbox
1. Verify that the procedure for “Establishing Communications” that
begins on page 27 has been performed to establish a connection
between the PC and the control system.
2. Open Crestron Toolbox and select Tools | System Info.
Crestron Toolbox – Tools | System Info
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 31