User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
If placing the antenna vertically causes it to lay parallel to a metal surface
(i.e. a metal wall), the antenna should be oriented horizontally
(perpendicular to the metal surface) as shown in the following diagram.
Horizontal Orientation
NOTE: RF propagation is best from the sides of the antenna.
For specific information on where to place the C2N-MNETGW, refer to
“Gateway Placement” on page 39.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 41