User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
(subject to site-specific conditions) without the use of repeaters or other
infiNET devices. The range is dependent on construction of the building,
obstructions, and RF interference from other devices. The location of a
network device and the orientation of its antenna are also important
factors in determining RF performance. For more information on proper
orientation, refer to “Appendix B: Optimum RF Reception Guidelines”
on page 39.
By constantly monitoring the signal quality of the wireless network,
infiNET devices can be set to automatically change “channels” to the
clearest available channel to avoid interfering with other devices such as
cordless phones and Wi-Fi computer networks.
As part of an infiNET network, every infiNET device functions as a
repeater while maintaining its ability to receive and transmit network data
over the wireless network. Adding more infiNET devices or repeaters to
the network effectively increases the range, strength, and reliability of the
network. Multiple gateways can be connected via Cresnet to one 2-Series
control system.
Specifications
The table below is a summary of specifications for the C2N-MNETGW.
Specifications of the C2N-MNETGW
SPECIFICATION DETAILS
Cresnet Power Usage 3 Watts (24VDC @ 0.125A)
Default Network ID 0F
Operating Frequency 2400 MHz to 2483.6 MHz
(802.15.4 compliant)
RF Output Power 10 mW
Operating Ranges¹
Typical Distance
Indoors (without
repeater device)
Maximum Distance
Outdoors
150 ft
250 ft
(subject to site-specific conditions)
Available Channels 16 (numbered 11 through 26 per
802.15.4)
(continued on following page)
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 3