User Guide

InfiNET™ Gateway/Transceiver Crestron C2N-MNETGW
Specifications of the C2N-MNETGW (continued)
SPECIFICATION DETAILS
Default RF Channel 26
Antenna (included)
Type
Antenna Connector
Dipole Antenna
Reverse SMA with Female
Connector
2-Series Control
System Update File
2,3
Version 3.154 or later
C2N-MNETGW
firmware
C2N-MNETGW.v1.10.075.upg or
later
Dimensions
(without included
antenna)
Width: 2.47 in (6.28 cm)
Height: 1.24 in (3.15 cm)
Depth: 3.88 in (9.85 cm)
Weight 8.3 oz (1.15 kg)
1 The location of the transceiver and the orientation of the antenna are important factors in
the RF performance. With the unit located outside of any metal enclosures, the antenna
can be adjusted to achieve the best range. The range is dependent on its placement and
the building in which it is used. The construction of the building, obstructions, and RF
interference from other devices are factors determining the effective range of the unit. To
prevent unit-to-unit RF interference, multiple transceivers operating at the same
frequencies should not be installed within three to five feet of each other.
2 The latest software versions can be obtained from the Crestron website. Refer to the
NOTE following these footnotes.
3 Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron
Product Catalog for a complete list of 2-Series control systems.
NOTE: Crestron software and any files on the website are for
Authorized Crestron dealers and Crestron Authorized Independent
Programmers (CAIP) only. New users may be required to register to
obtain access to certain areas of the site (including the FTP site).
Physical Description
The C2N-MNETGW, shown in the following diagrams, is housed in a
black enclosure. Six light-emitting diodes (LEDs) on the front of the unit
indicate the unit’s operating status. The RF antenna is not shown in the
line drawing for clarity. A 4-position terminal block connector plug is
provided to connect to other Cresnet system devices. A pushbutton for
setting the network ID and a pushbutton for activating the Acquire mode
4 • infiNET™ Gateway/Transceiver: C2N-MNETGW Operations Guide - DOC. 6317