User Guide

Crestron C2N-MNETGW infiNET™ Gateway/Transceiver
are recessed below the front of the enclosure. There are four rubber feet
on the base of the unit for stability and to prevent slippage.
Physical Views of C2N-MNETGW
Ports
The C2N-MNETGW has two ports. Refer to the diagrams and
descriptions that follow.
NET
This 4-position terminal block connector is used to connect the
C2N-MNETGW to the Cresnet network. Data and power for the
C2N-MNETGW are provided via the connection. Refer to “Network
Wiring” on page 8.
ANTENNA
This antenna port is used to connect the included dipole antenna. The
included antenna can be oriented for optimum reception. For information
of obtaining optimum reception, refer to “Appendix B: Optimum RF
Reception Guidelines” on page 39.
NOTE: Only the included antenna should be used.
Operations Guide - DOC. 6317 infiNET™ Gateway/Transceiver: C2N-MNETGW • 5