Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON Regulatory Compliance As of the date of manufacture, the C2N-RTHS has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. Federal Communications Commission (FCC) Compliance Statement This device complies with part 15 of the FCC Rules.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Contents Temperature and Humidity Sensor, Cresnet: C2N-RTHS 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..........................................................................................................
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Temperature and Humidity Sensor, Cresnet: C2N-RTHS Introduction The C2N-RTHS is a wall-mounted temperature and relative humidity sensor that communicates directly with any 2-Series control system via the Cresnet® control network. One-piece mounting makes the C2N-RTHS simple to install. The 1-1/2 inch (39 mm) diameter face protrudes just 1/8 inch (3 mm) from the wall surface and is easily painted or wallpapered to blend into the wall surface.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Specifications Specifications for the C2N-RTHS are listed in the following table.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® 1. The latest software versions can be obtained from the Crestron® Web site. Refer to the NOTE following these footnotes. 2. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product Catalog for a complete list of 2-Series control systems. 3. When loading VT Pro-e® files or firmware through the RS-232 port of the control system, be sure that the baud rate is at 38400 (Cresnet speed) or lower.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS C2N-RTHS Overall Dimensions (Front and Angled Views) Mounting Clips 1 1.59 in (41 mm) C2N-RTHS Overall Dimensions (Rear and Angled Views) 10 in (254 mm) Connectors, Controls & Indicators # CONNECTORS, CONTROLS & INDICATORS DESCRIPTION 1 Setup Button and LED (1) Miniature pushbutton and red LED, used for setting network ID during initial configuration or when the device is being added/replaced. Also used for touch-settable ID (TSID).
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Setup Network Wiring When wiring the Cresnet network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Use the Crestron Power Calculator to help calculate how much power is needed for the system (www.crestron.com/calculators).
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Installation NOTE: Ensure the location is not close to a heat or humidity source and is away from direct sunlight, skylights, and windows. When mounting the sensor outdoors, do not place in direct sunlight, and do not place where the sensor will be directly exposed to precipitation. Sensors are suitable for mounting in dry or damp locations as defined by the National Electrical Code. Complete the following procedure to install the C2N-RTHS: 1.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 5 before attaching the Cresnet wires to the sensor. Apply power after all connections have been made. Wiring the C2N-RTHS Wire Nuts Pigtail Wires from Sensor Mounting Clips Operations and Installation Guide - DOC.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron Web site. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at www.crestron.com/support. First-time users will need to establish a user account.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Programming with D3 Pro Crestron’s D3 Pro lighting software provides all the tools necessary to create a complete Crestron lighting system for residential applications. The lighting system includes the control system logic program, touchpanel projects and keypad programming, documentation and real-time lighting adjustment capabilities.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Locating the C2N-RTHS in the Device Library The system tree of the control system displays the device in the appropriate slot with a default Net ID as shown in the following illustration. C2Net Device, Slot 9 2. If additional C2N-RTHS devices are to be added, repeat step 1 for each device. Each C2N-RTHS is assigned a different Net ID number as it is added. 3.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® “Device Settings: Crestron C2N-RTHS” Window NOTE: The ID code specified in the SIMPL Windows program must match the Net ID of each unit. Refer to “Identity Code” on page 5. Program Manager Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, or firmware) can be transferred to the control system (and/or device).
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Programs and Firmware Program or firmware files may be distributed from programmers to installers or from Crestron to dealers. Firmware upgrades are available from the Crestron Web site as new features are developed after product releases. One has the option to upload programs via the programming software or to upload and upgrade via the Crestron Toolbox.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. C2N-RTHS Troubleshooting TROUBLE No temperature or humidity reading. PROBABLE CAUSE(S) Wiring not properly connected. Improper Cresnet ID. Improper programming. CORRECTIVE ACTION Check connection, refer to “Hardware Hookup” on page 7.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS When calculating the length of wire for a particular Cresnet run, the wire gauge and the Cresnet power usage of each network unit to be connected must be taken into consideration. Use Crestron Certified Wire only. If Cresnet units are to be daisy chained on the run, the Cresnet power usage of each network unit to be daisy chained must be added together to determine the Cresnet power usage of the entire chain.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron Web site (www.crestron.com/manuals).
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Temperature and Humidity Sensor, Cresnet® Crestron C2N-RTHS This page is intentionally left blank. 18 • Sensor, Cresnet® Operations and Installation Guide - DOC.
Crestron C2N-RTHS Temperature and Humidity Sensor, Cresnet® This page is intentionally left blank. Operations and Installation Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 6232B (2009412) 04.11 Specifications subject to change without notice.
