Installation guide

Crestron CEN-NVS200 Network Video Streamer

Operations & Installation Guide – DOC. 7111E Network Video Streamer: CEN-NVS200

•

NOTE: The “Maintenance” page can also be accessed by entering the following

URL in the web browser:

http://Video Streamer/setup/maintain.html

Video Streamer is the host name or IP address of the CEN-NVS200.

Refer to the following sections for information about maintenance actions.

Rebooting the CEN-NVS200

To reboot the CEN-NVS200, click Reboot below the Reboot pane of the

“Maintenance” page.

Restoring Factory Default Settings (Excluding Network

Settings)

To restore factory-default settings excluding the NetworkType settings on the

“Network” configuration page, click Restore below the Restore pane of the

“Maintenance” page. If Network Type is left unchecked (i.e., is not excluded),

Network settings must be configured again on the “Network” configuration page

(refer to “Configuring Network Settings” which starts on page 32 for information).

Exporting/Uploading Files

To export daylight savings time rules, custom language files and settings backup

files, click the appropriate Export button. To upload daylight savings time rules,

custom language files and settings backup files, click the appropriate Browse button

and select the file to upload, then click Upload.

Upgrading Firmware

To upgrade CEN-NVS200 firmware, click Browse, locate and select the firmware

file, then click Upgrade below the Upgrade firmware pane.