User Guide

Ethernet Enabled Programmable TV/AV Controller Crestron CEN-TVAV

6. Refer to figure below. While the Viewport is displayed, select Setup |

Communications (alternatively, depress Alt+D) to open the Port

Settings dialog box.

Accessing the Port Settings Dialog Box

7. Select the appropriate connection type. (If using the RS-232 port of the

CEN-TVAV for the connection to the PC, refer to “Special

Considerations for Using the RS-232 Port for Uploading Programs” on

page 9 for further information.) Verify that an available COM port

(COM 1 is shown below) is selected. Set the baud rate to 38400, the

parity to None, the data bits to Eight, and the stop bits to One. Refer to

the dialog box shown below for the remaining settings and click the

OK button as shown to save the settings and close the box.

Port Settings Dialog Box

• Ethernet Enabled Programmable TV/AV Controller: CEN-TVAV Operations Guide - DOC. 5720A