User Guide

Ethernet Enabled Programmable TV/AV Controller Crestron CEN-TVAV
Wiring and Configuration
Shown below, a CNMSX-PRO is wired to a remote processing CN-TVAV through
its Cresnet and is communicating with two CEN-TVAV units over Ethernet cabling.
The CEN-TVAV #1 has two Cresnet devices wired to it, a VT-3500 touchpanel and
a CNSC-1 slide controller, and CEN-TVAV #2 has no Cresnet peripherals. The
CNMSX-PRO also communicates with a CEN-IO via Ethernet.
Typical Wiring #2
CEN-TVAV #1
192.168.8.2
CEN-TVAV #2
192.168.8.3
CNMSX-PRO
192.168.8.1
CEN-IO
192.168.8.4
CN-TVAV
NET ID 04
ST-CNB
VT-3500 CNSC-1
ETHERNET HUB
UPLINK TO
REST OF
ETHERNET
CRESNET
ETHERNET
WIRING LEGEND
The diagram below and continued on the next page shows the configuration of the
systems (in a simplified diagram) so that the CNMSX-PRO communicates properly
with the CEN-TVAV's, CN-TVAV, and CEN-IO units. The system is also
configured so that the CNMSX-PRO communicates with the local Cresnet system on
the first CEN-TVAV.
Typical Configuration (1 of 2)
CNMSX-PRO SLOTS
IP.ID 03: CEN-TVAV
SLOT 1:TVAVIR-1
SLOT 2:TVAVIRGW
SLOT 3:TVAVIO-4
SLOT 4:TVACOM-1
SLOT 6:CRESNET
NETID 03: VT-3500
NETID 15: CNSC-1
SLOT 7:CEN-ISC(R)
PORT 1: CEN-ISC(R)
...
PORT 16: CEN-ISC(R)
CEN-TVAV
SLOT 1:TVAVIR-1
SLOT 2:TVAVIRGW
SLOT 3:TVAVIO-4
SLOT 4:TVACOM-1
SLOT 7:CEN-ISC(L)
PORT 1: CEN-ISC(L)
...
PORT 16: CEN-ISC(L)
CNMSX-PRO 192.168.8.1
CEN-TVAV#1 192.168.8.2
IP TABLE OF CEN-TVAV#1
03: 192.168.8.1 (CNMSX-PRO) *
IP.ID 04: CEN-TVAV
SLOT 1:TVAVIR-1
SLOT 2:TVAVIRGW
SLOT 3:TVAVIO-4
SLOT 4:TVACOM-1
SLOT 5:CEN-ISC(R)
PORT 1: CEN-ISC(R)
...
PORT 16: CEN-ISC(R)
CEN-TVAV
SLOT 1:TVAVIR-1
SLOT 2:TVAVIRGW
SLOT 3:TVAVIO-4
SLOT 4:TVACOM-1
SLOT 5:CEN-ISC(L)
PORT 1: CEN-ISC(L)
...
PORT 16: CEN-ISC(L)
CEN-TVAV#2 192.168.8.3
IP TABLE OF CEN-TVAV#2
04: 192.168.8.1 (CNMSX-PRO) *
* MARKED AS
"MASTER" ENTRY
34
• Ethernet Enabled Programmable TV/AV Controller: CEN-TVAV Operations Guide - DOC. 5720A