Installation guide

802.11a/b/g Wireless Access Points Crestron CEN-WAP-ABG
Functionality: From the drop-down list, select either of the following:
• Disable: Prevents MAC address filtering.
• Enable: (Default setting) Allows MAC address filtering.
The following shows the “MAC Filter” page when MAC filtering is enabled in the
Functionality drop-down list.
“MAC Filter” Page (MAC Filtering Enabled)
If you have enabled MAC filtering, configure MAC filter settings as follows.
Access control type: In the drop-down list, select either of the following:
• Prevent: Denies wireless network access to up to 64 specific wireless
devices.
• Permit only: (Default setting) Permits wireless network access to up to 64
specific wireless devices.
34 • 802.11a/b/g Wireless Access Points: CEN-WAP-ABG Operations & Installation Guide – DOC. 6695C