Installation guide

Crestron CEN-WAP-ABG 802.11a/b/g Wireless Access Points
Viewing DHCP Mappings
You can view the status of current static and dynamic DHCP mappings. Static
DHCP mappings are set in the Static DHCP Mappings section of the “DHCP
Server” configuration page. Dynamic DHCP mappings are based on the Starting IP
address and Maximum number of DHCP users settings of the “DHCP Server” page.
For additional information about DHCP server configuration, refer to “Configuring
DHCP Server Settings” on page 23.
To view the status of current DHCP mappings, click the STATUS tab and then click
the DHCP MAPPINGS subtab. The “Current DHCP Mappings” page opens.
“Current DHCP Mappings” Page
NOTE: To refresh the screen, click Refresh at the bottom of the screen.
For each DHCP mapping, the DHCP Mapping Table displays the following
information:
No.: Displays the numerical order in which a wireless client was assigned a static
DHCP mapping.
MAC Address: Displays the MAC address of the client.
Expires in: Displays the expiration time of the DHCP mapping.
Operations & Installation Guide – DOC. 6695C 802.11a/b/g Wireless Access Points: CEN-WAP-ABG • 47