User Guide
Crestron Quick Guide to Touchpanel Connections
PHONE
Connect this standard mini phone jack (105 mW per channel,
8 ohm load) to the plug of an external headphone set, not
supplied.
PC CARD
Two Type II PCMCIA Card slots used for
memory expansion up to 4GB or more, VT
Pro-e project uploads, or installation of a
wireless network card.
A cover is secured over the slots to protect the
electronics. Use a #1 Phillips screwdriver to
remove the cover. The plate can be flipped
and secured if only one slot needs to be
accessed.
CAUTION: PCMCIA cards are installed face down.
NET
The four-position mini-terminal block connector provides
communication with a Cresnet control network using three of the
connecting pins (Y, Z, and G).
The TPMC-15 and TPMC-17 do not use, or supply power to the
24 VDC Cresnet connection.
NOTE: The TPMC-15 and TPMC-17 are only compatible with 2-Series control systems.
Crestron Quick Guide to Touchpanel Connections Doc. 4903
5