User Guide

Quick Guide to Touchpanel Connections Crestron
CH (CH versions only)
CH versions of the TPMC-15 and TPMC-17 feature
two video input ports to connect to a Crestron CNX-
PVID device (or any Crestron CAT5 video source
such as CNXRMC, CNXRMCLV, C2N-IVDS) and one
bi-directional audio port for connecting a Crestron
CNX-BIPAD8 or other similar device such as the
C2N-IADS.
The video port receives composite, S-video, or
component signals over CAT5 wiring.
The audio port receives line-level audio input signals
and transmits line-level microphone output over
CAT5 wiring.
Each port is an 8-pin RJ-45 connector with pinouts
described in the following tables.
Video In 1 and 2 Pin Assignments
PIN
WIRE COLORS
(568B)
WIRE COLORS
(568A)
COMPOSITE
VIDEO
S-VIDEO
COMPONENT
VIDEO
1 WHITE/ORANGE WHITE/GREEN + Composite + Luminance + Y
2 ORANGE GREEN - Composite - Luminance - Y
3 WHITE/GREEN WHITE/ORANGE N/A + Chrominance + P
B
4 BLUE BLUE N/A N/A + P
R
5 WHITE/BLUE WHITE/BLUE N/A N/A - P
R
6 GREEN ORANGE N/A - Chrominance - P
B
7 WHITE/BROWN WHITE/BROWN N/A N/A N/A
8 BROWN BROWN N/A N/A N/A
Audio In/Out Pin Assignments
PIN
WIRE COLORS
(568B)
WIRE COLORS
(568A)
AUDIO I/O
1 WHITE/ORANGE WHITE/GREEN + Mic Left Out
2 ORANGE GREEN - Mic Left Out
3 WHITE/GREEN WHITE/ORANGE + Mic Right Out
4 BLUE BLUE + Audio Left In
5 WHITE/BLUE WHITE/BLUE - Audio Left In
6 GREEN ORANGE - Mic Right Out
7 WHITE/BROWN WHITE/BROWN + Audio Right In
8 BROWN BROWN - Audio Right In
Doc. 4903 Crestron Quick Guide to Touchpanel Connections
6