User Guide

Crestron Quick Guide to Touchpanel Connections

Video Connection Example - Balanced S-Video from CNX-PVID

Using a standard EIA-568B CAT5 cable, program the S-video to output from

level 2 of the CNX-PVID C (Chrominance) and level 1 for Y (Luminance).

FROM PIN CNX-PVID

(ROOMS 1 – 8)

RJ-45 CONNECTOR

TO PIN TPMC-15-CH OR TPMC-17-CH

VIDEO IN CONNECTOR 1 OR 2

RJ-45 CONNECTOR

1 Level 1 + 1 +Luminance

2 Level 1 - 2 - Luminance

3 Level 2 + 3 + Chrominance

6 Level 2 - 6 - Chrominance

QM (QuickMedia versions only)

QM versions of the TPMC-15 and TPMC-17 feature

two QM input ports for connecting two QM sources

and one QM output port for connecting a QM

receiver or any other device with a QM input, such

as a QM switcher (QM-MD-8X8) or receiver

(QM-RMCRX-BA).

NOTE: When transmitting S-video, luminance uses the green video pathway, and

chrominance uses the red video pathway. When transmitting composite video, the signal is

carried on the blue video pathway.

NOTE: When using Crescat-QM wiring, four additional wires are included for making

Cresnet connections.

Each QM port is an 8-Pin RJ-45 connector. Pinouts are described in the

following table.

RJ-45 Pin Assignments

PIN WIRE COLORS

(568B)

QM RGB

ASSIGNMENT

QM ASSIGNMENT:

COMPOSITE,

S-VIDEO AND AUDIO

1 WHITE/ORANGE - RGB Red - CHROMINANCE

2 ORANGE + RGB Red + CHROMINANCE

3 WHITE/GREEN - RGB Green - LUMINANCE

4 BLUE + Digital Audio + AUDIO

5 WHITE/BLUE - Digital Audio - AUDIO

6 GREEN + RGB Green + LUMINANCE

7 WHITE/BROWN - RGB Blue - COMPOSITE

8 BROWN + RGB Blue + COMPOSITE

Crestron Quick Guide to Touchpanel Connections Doc. 4903