User Guide

Quick Guide to Touchpanel Connections Crestron
VIDEO IN
This eight-pin RJ-45 connection provides connectivity to the
CNX-PVID or the TPMC-CH-IMC interface module.
This port provides component, composite or S-video balanced
input to the touchpanel over Crestron Certified Wiring.
Description of the pinouts is shown in the following table. A cable
for this connection is provided with the touchpanel.
CAUTION: Only use the TPMC-CH-IMC Interface Module when connecting this port. Use of
other “IMC” products could damage the panel. Earlier IMC modules were equipped with a
proprietary 10-pin RJ cable. If this is inadvertently connected to the 8-pin RJ-45 connector
the panel will be damaged.
NOTE: Only one video source may be displayed at a time.
Video In Pin Assignments
PIN WIRE COLORS (568B) COMPOSITE S-VIDEO COMPONENT
1 WHITE/ORANGE + Composite + Luminance + Y
2 ORANGE - Composite - Luminance - Y
3 WHITE/GREEN N/A + Chrominance + P
B
4 BLUE N/A N/A + P
R
5 WHITE/BLUE N/A N/A - P
R
6 GREEN N/A - Chrominance - P
B
7 WHITE/BROWN N/A N/A N/A
8 BROWN N/A N/A N/A
Doc. 4903 Crestron Quick Guide to Touchpanel Connections
16