User Guide

ManualsBrandsCrestron ManualsOtherCG TOUCHPANELS

Crestron Quick Guide to Touchpanel Connections

NET

This 4-position mini-terminal block connector is used to

connect to other Cresnet peripherals in a system.

Another NET connector is located on the other side of the

module. Data and power for the TPMC-CH-IMC are provided

via either connection.

Pins 24 and G provide 24 VDC and ground.

Pins Y and Z provide communications (data).

VIDEO

The video input consists of three BNC

connectors for unbalanced video signals. The

component, composite or S-video input

signal from an external video source is

connected to these ports.

AUDIO IN

The 5-position mini-

terminal block

connector is wired to

an external audio

source and provides

balanced and/or

unbalanced audio

input.

AUDIO IN Pinouts

PIN DESCRIPTION

L + Left Positive

L - Left Negative

G Ground

R + Right Positive

R - Right Negative

AUDIO OUT

The 5-position mini-

terminal block

connector mates

with the included

connector and

provides balanced

and/or unbalanced

microphone output.

AUDIO OUT Pinouts