User Guide

Quick Guide to Touchpanel Connections Crestron
NET
This four-pin connector is used to connect to other Cresnet peripherals in a
system and provide network power to the touchpanel if an external power
pack is not used.
Pins 24 and G provide 24 VDC and ground.
Pins Y and Z provide communications (data).
24 VDC, 2.0A (Power Supply)
This female connector is used to supply 24 VDC power to the TPS-IMPC and
the touchpanel from an optional power pack (Crestron model PW-2420RU).
When power is supplied to the TPS-IMPC through this connector, a
Cresnet power connection on the NET connector is not required to
display video on the touchpanel.
CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to do so could
cause equipment damage or void the Crestron warranty.
CAUTION: If power is provided to the TPS-IMPC from the +24VDC on a Cresnet connector
or the
PW-2420RU, power must not be applied to the power input on the touchpanel base.
NOTE: When power is supplied through this connector, Crestron recommends disconnecting
the +24 VDC on the Cresnet connector (if it is connected).
NOTE: Use care in wiring installations to avoid applying 24 VDC power to Cresnet wiring
from multiple sources.
Doc. 4903 Crestron Quick Guide to Touchpanel Connections
36