User Guide

Quick Guide to Touchpanel Connections Crestron

AUDIO (To Panel)

This 8-pin RJ-45 mates with the TPS-3000, TPS-5000, or TPS-6000

touchpanel.

The 8-pin audio cable assembly is supplied. Even though

the 10-pin net/video cable may fit into the port, do not use

it. This port provides audio input to the touchpanel and

microphone output from the touchpanel. A description of

the pinouts is shown in the following table.

AUDIO Pinouts

PIN DESIGNATION DESCRIPTION

1 L+ Left Input (Positive)

2 L - Left Input (Negative)

3 GND/Shield Audio Input Ground/Shield

4 R+ Right Input (Positive)

5 R - Right Input (Negative)

6 GND/Shield Mic Output Ground/Shield

7 M+ Mic Output (Positive)

8 M - Mic Output (Negative)

To determine the location of pin 1, hold the cable so that the end of the 8-pin

RJ-45 connector is facing away from you, with the clip side down and the

copper side up.

The copper connector on the far left is pin 1.

Doc. 4903 Crestron Quick Guide to Touchpanel Connections