User Guide

Quick Guide to Touchpanel Connections Crestron
AUDIO INPUT
This 6-position, mini-terminal block connector provides line
level, balanced and unbalanced audio input.
AUDIO INPUT
S
R+
R -
L+
L -
S
AUDIO Pinouts – Balanced
PIN # DESIGNATION DESCRIPTION
1 S Shield
2 R+ Right Input (Positive)
3 R - Right Input (Negative)
4 L+ Left Input (Positive)
5 L - Left Input (Negative)
6 S Shield
NOTE: When sending balanced audio from a CNX-BIPAD8 or CNX-PVID device, only the
Positive (+) and Negative (-) left and right wires are to be connected to the touchpanel. Do
not connect the Shield (S) wires (pins 1 and 6).
AUDIO Pinouts – Unbalanced
PIN # DESIGNATION DESCRIPTION
1 S Ground
2 R+ Right Input (Positive)
3 R - Right Ground
4 L+ Left Input (Positive)
5 L - Left Input Ground
6 S Ground
NOTE: Using two jumpers, connect R Shield to R - and L Shield to L - respectively at the
TPS-3100L Audio Input connector.
Doc. 4903 Crestron Quick Guide to Touchpanel Connections
42