Specifications

 High-performance stereo audio switcher and preamp
 Distributes 8 stereo audio sources to 8 line outputs
 Combinable for up to 32 rooms
 Volume, bass, treble, balance, loudness, and
mute controls
 Programmable input gain compensation
 Selectable mono summing on each output
 Protective output mute relays
 Fully configurable in SystemBuilder software
 Cresnet communications
CNX-PAD8A
Audio Distribution Processor
ww w.c restro n. eu
® 2007 Crestron Electronics, Inc. Specifications subject to change.
Please contact Crestron International for specific availability.
42
Audio & Video Solutions
Audio Distribution
 True audiophile-grade 2, 12 and 16 channel
amplifiers
 Speaker-level distribution to 6 or 8 rooms
 60 Watts/ch. @ 8 ohms; 90 Watts/ch. @ 4 ohms
(FTC full bandwidth)
 Massive twin toroidal transformers with MOH
cores and bifilar windings
 Separate power supply for every channel
 Convection-cooled modular component design
 Up to 8 outputs bridgeable using optional CNXBRMO
 Power control and temperature monitoring
via Cresnet
 Independent on/off control per stereo pair, channel
fault detection, output level monitoring and short-
circuit detection (CNAMPX-16X60 only)
CNAMPXI-2X60
CNAMPXI-12X60
CNAMPXI-16X60
M
ulti-Room Amplifiers
CNX-BIPAD8
 High-performance stereo audio switcher and preamp
 Distributes 16 stereo audio sources to 8 line outputs
 RCA and RJ45 CAT5 outputs
 Combinable for up to 32 rooms
 8 additional room return inputs via CAT5
 Volume, bass, treble, balance, loudness, and
mute controls
 Programmable input gain compensation
 Selectable mono summing on each output
 Protective output mute relays
 Fully configurable in SystemBuilder software
 Cresnet communications
CNX-BIPAD8
CAT5 Audio Distribution
Processor
 For systems utilizing multiple CNX-BIPAD8’s
 Enables redistribution of return signals from
room solution boxes
 Supports up to 4 CAT5 balanced return feeds
CNX-PBAR4
C
AT5 Balanced Audio
Receiver
 Cost-effective, high-end performance
 Extensively customizable touchpanel control
 No front panel controls – reduces cost and
prevents trouble
 Analog Devices SHARC 32-bit floating point DSP
 Dolby Digital EX and Dolby Prologic II
surround modes
 DTS ES and DTS Neo:6 2-channel modes
 Precision 24-bit 96 kHz A/D converters
 7.1 output featuring 24-bit 192 kHz D/A converters
 6-band parametric equalization and 20 mS delay
adjustment per output
 Discrete subwoofer output with LFE and
extensive bass management control
 Two stereo outputs for separate
zone feed and recording
 Bidirectional CAT5 balanced audio port
for connection to CNX-BIPAD8
 2 coaxial and 2 optical digital audio inputs
 5 RCA-type analog stereo inputs
 Complete setup using Digital Media Tools software
 Cresnet communications
C2N-DAP8
7.1 Surround Sound
Processor
 7 channels of world-class audio amplification
 200 Watts/ch. @ 8 ohms; 300 Watts/ch. @ 4 ohms
 Massive twin toroidal transformers with MOH
cores and bifilar windings
 Separate power supply for each mono channel
 Convection-cooled modular component design
 Power control and temperature monitoring
via Cresnet
CNAMPXI-7X200
7 Channel Surround Sound
Amplifier
 Professional surround sound processor and
video switcher
 All the features of the C2N-DAP8 combined
with a CNXRMCLV room solution box
 High-bandwidth crosspoint video matrix
 12 RCA inputs and 12 RCA outputs – configurable
for composite, S-Video, HDTV/component, and
digital audio
 Bidirectional CAT5 balanced audio & video –
connects to head-end via CresCAT-Q wire
 Built-in video signal sensing
 1) RS-232 and 4) IR control ports
 Optional current sensor
 Optional IR remote receiver
C2N-DAP8RC
7.1 Surround Sound Processor
and Room Solution Box
Surround Sound