Specifications

infiNET™ Dimmers Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF
The LEDs on all of the CLW-DIM1RF dimmers on the list will flash.
9. Physically locate the dimmer in the bedroom with the flashing LED and
touch the top or bottom of the large button. The status of the “BR dimmer”
will change from “Not Verified” to “Setup Complete” and the next device
on the list (CLW-DIM1RF, MNET ID 03, “LR dimmer”) will be
highlighted.
Touching a device may result in setting a duplicate MNET ID. A warning
will be displayed.
Duplicate MNET ID Warning
Click Yes to set the device to the duplicate MNET ID (the status will be
listed with the comment “An error occurred changing the network ID of one
or more devices.” Clicking No will skip the setup process for that device
and continue to the next device on the list.
If two devices share a duplicate MNET ID, the devices with the duplicate
MNET IDs must be set up again.
NOTE: If the device does not respond and/or register, click Skip.
Setup Lighting Window, Setup of First Device in List Completed
10. Continue identifying all of the remaining unidentified devices on the list.
When all devices have been identified, a summary will be displayed in the
upper portion of the window.
18 • infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396A