User Guide

Professional Audio Amplifiers Crestron CNAMPX-12/16X60
7. Depending upon the particular installation, rack mounting ears may or
may not be installed. Perform the appropriate step below.
7a. If rack mounting ears are NOT installed, continue to step
8 below.
7b. If rack mounting ears are installed, refer to the diagram below.
Using the 1/8-inch hex wrench, remove the mounting ear screws
and ears from the left and right sides of the CNAMPX-12/16X60.
Mounting Ear Screws (Left-Side)
8. Refer to the diagram below. Using the 1/8-inch hex wrench, remove
the three screws from the top-front edge, then remove the four screws
from the left side and four screws from the right side.
Top-Front and Side Cover Screws
6 • Professional Audio Amplifiers: CNAMPX-12/16X60 Service Guide - DOC. 5885B