User Guide

Crestron CNAMPX-12/16X60 Professional Audio Amplifiers
9. Refer to the diagram below. Using the 1/8-inch hex wrench, remove
the four screws from the top-center of the cover.
NOTE: The four screws at the top-center of the cover are 1/2-inch long. The
remaining cover screws are 1/4-inch. When reinstalling the cover, these screws are
NOT interchangeable.
Top-Center Cover Screws
10. Refer to the diagram below. Using the 1/8-inch hex wrench, remove
the three screws from the top-rear of the cover.
Top-Rear Cover Screws
11. Remove the cover and proceed to the appropriate internal replacement
procedure.
Service Guide - DOC. 5885B Professional Audio Amplifiers: CNAMPX-12/16X60 • 7