User Guide

Crestron CNAMPX-12/16X60 Professional Audio Amplifiers
Module Bottom Screws
NOTE: For the CNAMPX-16X60, there is minimum clearance between the
modules. When removing the module brace screws, do not allow the screws to fall
between the modules. If screws fall between the modules, additional modules may
have to be removed.
4. Position the unit bottom-side down onto the work surface. Refer to the
diagram below (view is from overhead). Using a 5/32-inch hex wrench,
remove the module brace screws (12 for the CNAMPX-12X60, 16 for
the CNAMPX-16X60) and remove both braces.
Module Brace Screws
Service Guide - DOC. 5885B Professional Audio Amplifiers: CNAMPX-12/16X60 • 9