User Guide

Professional Audio Amplifiers Crestron CNAMPX-12/16X60
5. Access to modules of the CNAMPX-12X60 is slightly different than
access to CNAMPX-16X60 modules. Perform the appropriate step
below.
5a. To replace module #6 of the CNAMPX-12X60 or any module of
the CNAMPX-16X60, continue to step
6 below.
5b. To replace a module other than module #6 of the CNAMPX-
12X60, proceed to step 8 on page 11.
6. Refer to the diagram below. Using a #1 Phillips screwdriver, remove
the screw that secures the card to the vertical bracket.
Cresnet System Interface Card Vertical Bracket Screw
7. Refer to the diagram below. Holding the card by hand and using a 5/64-
inch hex wrench, remove the two mounting screws that secure the card
and allow the card to hang by its wiring.
Cresnet System Interface Card Mounting Screws
10 • Professional Audio Amplifiers: CNAMPX-12/16X60 Service Guide - DOC. 5885B