Specifications

Crestron CNAMPX-7X200 7 Channel Surround-Sound Amplifier
Device Settings Window
NOTE: SIMPL Windows automatically resets the default NET ID values of a
device added to a program if a duplicate device or a device with the same default
NET ID already exists in the program. Always ensure that the network device NET
IDs set via Viewport match the ones in your SIMPL Windows program.
CNAMPX-7X200 Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron control system
by assigning signals to symbols. The diagram below shows the CNAMPX-7X200
symbol in the Detail View of the Programming Manager.
Detail View of the CNAMPX-7X200 Symbol in SIMPL Windows Programming Manager
The two tables on the next page list the input and outputs, respectively, and their
functional descriptions.
NOTE: All signals listed in the following tables are DIGITAL signals unless noted
otherwise. A digital signal can be high (logic level of 1), low (logic level of 0), and
also have rising edge (when it goes from low to high) and falling edge (from high to
low) transitions. Depending upon how the symbol was created, symbol inputs may
work at the logic levels or on transitions.
Operations Guide – DOC. 8179 7 Channel Surround-Sound Amplifier: CNAMPX-7X200 11