User Guide

Crestron CNAMPX-7X200 7 Channel Surround-Sound Amplifier
Setup
WARNING: To prevent bodily injury when mounting or servicing this unit in a
rack, you must take special precautions to ensure that the system remains stable. The
following guidelines are provided to ensure your safety.
 If the rack is provided with stabilizing devices, install the stabilizers before
mounting or servicing the unit in the rack.
 When mounting this unit assembly in a partially filled rack, load the rack from
the bottom to the top with the heaviest component at the bottom of the rack.
CAUTION: Due to the heat dissipation of the CNAMPX-
7X200 (and all audio
amplifiers in general), allow at least one free rack space above and below the
CNAMPX-7X200 for proper circulation.
NOTE: Reliable grounding of rack-mounted equipment should be maintained.
Particular attention should be given to supply connections other than direct
connections to the branch circuit. (e.g., use of power strips).
Rack Mounting
Two “ears” are provided with the unit and must be installed so that it can be rack
mounted. Refer to the following illustration and complete the procedures below to
attach ears to the unit. The only tool required is an Allen wrench (supplied).
Ear Attachment for Rack Mounting
Operations Guide – DOC. 8179 7 Channel Surround-Sound Amplifier: CNAMPX-7X200 • 5