This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter Contents 30 Function Hand-Held IR Transmitter: CNIRHT-MM 1 Description Functional Description Physical Description Leading Specifications Transmitter ID Code Set or Display Transmitter ID via Keypad Buttons Set Transmitter ID via CNIDC and PC Programming with SIMPL™ Windows® or SIMPL+ Configure CNIRHT-MM Program CNIRHT-MM Symbol Example Program Problem Solving Troubleshooting Further Inquiries Future Updates Return and Warranty Policies Merchandise R
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter 30 Function Hand-Held IR Transmitter: CNIRHT-MM Description Functional Description The CNIRHT-MM is a 30 function, hand-held infrared (IR) transmitter designed to work with the CEN-TVAV and/or CN-TVAV. By setting an IR transmitter identification (ID) code in the CNIRHT-MM and using the keypad buttons, any television or audio-visual (TV/AV) device attached to the CEN/CN-TVAV may be controlled remotely.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM Physical Views and Dimensions 2.75 in (6.99 cm) 0.80 in (2.03 cm) LED PWR MUTE SRCH 1 2 - VOL + 3 4 5 6 CH+ 7 8 9 CH- CLR 0 ENT REW FF STOP PLAY LOCAL A B PAUSE C D 6.50 in (16.51 cm) CRESTRON Cresskill, NJ 07626 (201) 894-0660 * ****** BATTERY COMPARTMENT CRESTRON ELECTRONICS, INC CRESSKILL NJ 07626 This device complies with FCC rules Part 15 as of date of manufacture.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter 2 The latest software version can be obtained from the What’s New page (SIMPL Windows section) or Downloads page (SIMPLWIN Library) of Crestron’s website (www.crestron.com). New users are required to register in order to obtain access to the FTP site. 3 Filenames for update files have a UPZ extension and can be obtained from the What’s New page (Control Systems Update Files section) or Downloads page (OPSYS Library) of Crestron’s website.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM NOTE: If the CNIRHT-MM is within line-of-sight of multiple CEN/CN-TVAVs, the Transmitter ID must be unique only to the device for which it is intended. Otherwise, the CNIRHT-MM will control multiple CEN/CN-TVAVs simultaneously.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter 4. Release the “0” key and observe the LED of the CNIRHT-MM blink once to indicate the keypad programming mode. 5. To set or display a Transmitter ID, perform the appropriate step below. 5a. To set a Transmitter ID, press any button other than the “0” key to establish a “1” key. To enter the desired Transmitter ID code, use the “0” and “1” keys, enter any non-weighted zeros, and enter the most significant bit first.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM CNIRHT-MM Sensor SENSOR (PHOTO TRANSISTOR) * ****** 9V BATTERY 5. At the PC, start SIMPL Windows or VT Pro-e. 6. From the SIMPL Windows or VT Pro-e menu bar, select Tools | Viewport to open the Crestron Viewport. 7. From the Viewport Functions menu, select Set Transmitter ID as shown below. Select Set Transmitter ID 6 • 30 Function Hand-Held IR Transmitter: CNIRHT-MM Operations Guide - DOC.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter 8. When the Set Transmitter ID window (shown below) appears, enter a two-digit hexadecimal number ranging from 10 to FE and click OK. “Set Transmitter ID” Window 9. Making sure that the IR probe of the CNIDC remains positioned over the CNIRHT-MM sensor, lift and rotate the CNIRHT-MM so that the front LED is visible. 10. As shown below, observe the Transmitter ID window and then click OK to set the Transmitter ID.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM Programming with SIMPL™ Windows® or SIMPL+ SIMPL (Symbol Intensive Master Programming Language) is an easy-touse programming language that is completely integrated and compatible with all Crestron system hardware. The objects that are used in SIMPL are called symbols. SIMPL Windows offers drag and drop functionality in a familiar Windows® environment. SIMPL Windows is Crestron's software for programming Crestron control systems.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter Configure CNIRHT-MM Program DEVICE LIBRARY Control Systems Wireless Remotes (IR) SYMBOL REQUIRED DROP WHERE CEN-TVAV Local System Views Processing or CN-TVAV Local Processing CNIRHT-MM CEN-TVAV or CN-TVAV Local Processing, Slot 02 TVAVIRGW ADDITIONAL SETUP Refer to the documentation supplied with CEN-TVAV or CN-TVAV for additional information. CHANGE IR ID (OPTIONAL) Single-click on TVAVIRGW.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM Detail View of CNIRHT-MM Symbol in SIMPL Windows’ Programming Manager (2 of 2) NOTE: All symbol outputs listed in the following table are DIGITAL signals. The signals are high (logic level of 1) as long as the keypad button is held. Subsequent symbols within the program should be activated on the rising edge (when CNIRHT-MM output goes from low to high) transitions. 10 • 30 Function Hand-Held IR Transmitter: CNIRHT-MM Operations Guide - DOC.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter CNIRHT-MM Symbol Output Reference Information SYMBOL OUTPUT Power Mute VolVol+ Search 1 2 3 (Optional) 4 5 6 Ch+ 7 8 9 KEYPAD LABEL PHYSICAL SWITCH PWR MUTE VOL VOL + SRCH 1 2 3 (No Label) 4 5 6 CH+ 7 8 9 SW1 SW2 SW3 SW4 SW5 SW6 SW7 SW8 SW9 SW10 SW11 SW12 SW13 SW14 SW15 SW16 SYMBOL OUTPUT KEYPAD LABEL PHYSICAL SWITCH ChCHSW17 Clr CLR SW18 0 0 SW19 Ent ENT SW20 Rew REW SW21 Fast Forward FF SW22 Stop STOP SW23 Play PLAY SW24 Local LOCAL SW25 S
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM Example Program The SIMPL Windows program contained in the CEN/CN-TVAV determines the functions for the individual keypad buttons of the CNIRHT-MM. An example program is available from the Downloads page (EXAMPLES Library) of Crestron’s website (www.crestron.com). Search for CNIRHTMM.ZIP that contains an example program and associated macros required to complete the program.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter Further Inquiries If after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876] or 1-201-767-3400. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
30 Function Hand-Held IR Transmitter Crestron CNIRHT-MM Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron CNIRHT-MM 30 Function Hand-Held IR Transmitter This page intentionally left blank. Operations Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide - DOC. 8171 06.01 Specifications subject to change without notice.
