User Guide

Crestron CNRACKX-DP CNX Dual Processor Modular Control System
5. From the Setup menu, verify that Auto Baud Search is checked. Refer
to illustration below.
Verifying Auto Baud Search
6. While the Viewport is displayed, select Setup | Communications
(alternatively, depress Alt+D) to open the Port Settings dialog box and
refer to the illustration below.
Accessing the Port Settings Dialog Box
7. Select the appropriate connection type (RS-232 for a PC connection
through the COMPUTER port of the CNRACKX-DP or CNXCPU or
TCP/IP through the Ethernet via optional LAN/DPA ports). Verify that
the proper COM port is selected. Set the baud rate to 38400, the parity
to None, the data bits to Eight, and the stop bits to One. Refer to the
dialog box shown below for the remaining settings. Click on the OK
button to save the settings and close the dialog box.
Operations Guide - DOC. 8151 CNX Dual Processor Modular Control System: CNRACKX-DP • 21