Specifications

Crestron TPMC-12 Isys i/O
®
Tilt Touchpanel Media Center
ETHERNET Details
The Ethernet portion of the setup menu allows configuration of the touchpanel
settings for Ethernet communications.
The Crestron Swirl logo at the top of the Ethernet portion of the setup menu
illuminates to indicate the status of your connection to the control system(s):
• Green Connected
• Yellow Network trouble
• Orange Connected to some but not all of the control systems (listed in IP
table)
• Red Not connected to any control system (listed in the IP table)
Adapters
Touch the Adapters button to access the “Ethernet Setup” window. Changes are
made in real time and there is typically no need to reboot. The Ethernet address and
mask are displayed on this screen.
“Ethernet Setup” Window
To configure the Ethernet adapter, touch its name once to select it in the Adapter
Name list. Then, touch Configure to open the “Local Area Connection Properties”
window. This window displays the connection and related required items.
NOTE: When configuring an adapter, only one item can be modified at a time. For
example, to modify an IP address and also change authentication, touch Configure
and modify the IP address, then touch OK (you must return to the “Ethernet Setup”
window). Touch Configure again, change authentication, then touch OK. The order
in which modifications are performed does not matter.
Operations Guide – DOC. 6675A Isys i/O
®
Tilt Touchpanel Media Center: TPMC-12 • 33