User Guide

CRESTRON CNSNET PC Interface
REMOTE CONTROL SYSTEMS
1 DOC. 8085
DESCRIPTION:
Functional Description
CNSNET
The CNSNET, illustrated in figure 1, is an RS-232 interface, designed to operate with the CRESNET II
remote control system (herein referred to as the CRESNET II system). This unit in conjunction with
VisionPC/Control
SM
software permits a PC to functionally operate as a touchpanel.
CRESTRON CNSNET
PWR
ID SEL
RS232
24
YZG
7.1 in
17.9 cm
1.4 in
3.7 cm
3.6 in
9.2 cm
Figure 1. CNSNET, RS-232 Interface
VisionPC/Control Software
VisionPC/Control software turns a project created in VisionPC/Create
SM
into a run-time executable. This
software provides full control and communications to a CRESTRON control system via your PC and a
CNSNET.
Physical Description
CNSNET electronic hardware is housed in a black cold-rolled painted steel box (refer to figures 1 or 2).
Silk screening is applied to the face of one panel of the steel case. Located on this panel is a four-pin
network port (24 Y Z G), a RJ-11 port (RS-232), a red LED (ID SEL), and a green LED (NET PWR).
There are four rubber bumpers on the base of the unit for stability and to prevent slippage.