Crestron CNWM-LU12 Lutron® Keypad Contents Lutron® Keypad: CNWM-LU12 Description Functional Description Physical Description Leading Specifications Setup Network Wiring Keypad Installation Identity Code Programming with SIMPL™ Windows CNWM-LU12 Symbol How the Example Program Works Problem Solving Troubleshooting Further Inquiries Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty Operations & Installation Guide - DOC.
Lutron® Keypad Crestron CNWM-LU12 ® Lutron Keypad: CNWM-LU12 Description Functional Description The Lutron® Keypad, CNWM-LU12, is a 12 button keypad that is part of the Crestron Home™ total control system. It features a faceplate and buttons that match the style and colors of Lutron’s GRAFIK EYE ™ or Homeworks™ systems. The CNWM-LU12 is a standard Cresnet device, may be programmed as desired using SIMPL™ Windows, and does not require a ST-LT interface module.
Lutron® Keypad Crestron CNWM-LU12 CNWM-LU12 Physical Views LEDs 1-10 LUTRON BUTTON 1 & LED 1 BUTTON 2 & LED 2 BUTTON 3 & LED 3 BUTTON 4 & LED 4 BUTTON 5 & LED 5 BUTTON 6 & LED 6 BUTTON 7 & LED 7 BUTTON 8 & LED 8 BUTTON 9 & LED 9 BUTTON 10 & LED 10 BUTTON 11 (WHITE, NO LED) BUTTON 12 (GREY, NO LED) BUTTONS 1-12 BUTTON & LED LAYOUT (VIEWED FROM FRONT) FRONT VIEW REMOVABLE FACEPLATE FACEPLATE FRAME ATTACHED TO BUTTON ASSEMBLY DEPTH = 1.20 in (3.05 cm) 2.73 in (6.
Lutron® Keypad Crestron CNWM-LU12 Leading Specifications The table below provides a summary of leading specifications for the CNWM-LU12. Dimensions and weight are rounded to the nearest hundredth unit. Leading Specifications of the CNWM-LU12 S P E C IFIC A T I O N P o w e r Requirem e n ts D e fault N e twork ID SIMPL Windows C N M X S -AV/Pro Upgrade File (UPZ) C N R A C K X /-D P U p g rade File (UPZ) D imensions & W e ight D E T A ILS 2 4 V D C C resnet power, load factor of two (2) W a tts.
Lutron® Keypad Crestron CNWM-LU12 Setup Network Wiring NOTE: If making category 5 wire connections, refer to the latest revision of the Cresnet Mini Network Cat 5 Interconnect Drawing (Doc. 5819). The document can be obtained from the Downloads page (CABLES and MANUALS Libraries) of Crestron’s website (www.crestron.com). Search for the CAT5.PDF file.
Lutron® Keypad Crestron CNWM-LU12 Keypad Installation After the Cresnet network wiring has been installed, the CNWM-LU12 is installed into a standard, 1-gang electrical box. The only tools required are a small flat-tip and a Phillips tip screwdriver. To install the keypad, perform the following procedure: NOTE: The CNWM-LU12 may be installed in any orientation. This procedure assumes that the keypad will be installed vertically with the two square buttons toward the bottom.
Lutron® Keypad Crestron CNWM-LU12 Identity Code Every equipment and user interface within the Cresnet network requires a unique identity code (NET ID). These codes are recognized by a two-digit hexadecimal number from 03 to FE. The NET ID of the keypad must match an ID code specified in the SIMPL Windows program. The NET ID of the CNWM-LU12 is factory set to 4E. The NET IDs of multiple keypads must all be unique and changed from a PC via VisionTools™ Pro (VT Pro) or SIMPL Windows.
Lutron® Keypad Crestron CNWM-LU12 CNWM-LU12 Symbol The diagram below shows the CNWM-LU12 symbol. The symbol contains 12 identical outputs and 10 feedback indicator inputs. Only the first 10 button presses have feedback inputs. Refer to “CNWM-LU12 Physical Views” on page 2 for the actual button layout.
Lutron® Keypad Crestron CNWM-LU12 Example CNWM-LU12 SIMPL Program 8 • Lutron® Keypad: CNWM-LU12 Operations & Installation Guide - DOC.
Lutron® Keypad Crestron CNWM-LU12 Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron technical support representative. CNWM-LU12 Troubleshooting TROUBLE POSSIBLE C A U S E (S) CORRECTIVE ACTION Keypad does n o t function when a button is depressed. K e y p a d is not receiving n e twork power. K e y p a d N E T ID is not unique.
Lutron® Keypad Crestron CNWM-LU12 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
