Specifications

Crestron CNWM-LU12 Lutron
®
Keypad
Operations & Installation Guide - DOC. 8150 Lutron® Keypad: CNWM-LU12 •• 7
CNWM-LU12 Symbol
The diagram below shows the CNWM-LU12 symbol. The symbol contains 12
identical outputs and 10 feedback indicator inputs. Only the first 10 button presses
have feedback inputs. Refer to “CNWM-LU12 Physical Views” on page 2 for the
actual button layout.
Detail View of the CNWM-LU12 Symbol in SIMPL Windows’ Programming Manager
How the Example Program Works
NOTE: For purposes of the following block diagram, the Grey-Btn and White-Btn
outputs of the CNWM-LU12 symbol have been rearranged for clarity. Refer to
“CNWM-LU12 Symbol” above for the correct location of the outputs.
NOTE: There is no need to recreate the example SIMPL Windows program. The
program is available from the Software Downloads page (EXAMPLES Library) of
Crestron’s website (www.crestron.com). Search for CNWMLU12.SMW. New users
are required to register in order to obtain access to the FTP site.
The example SIMPL program for the CNWM-LU12 is shown on the next page as a
block diagram. Signal lamp 1 is input to a CNECI-4A for lighting on/off control and
feedback is provided to the CNWM-LU12. The remaining press2 through press10
outputs are used for additional lighting and/or drape control. In this example, signals
volume up and volume dn are used to adjust the volume of an audio device through
a CNXVTC-3. No feedback is provided to the CNWM-LU12 for audio adjustments.