Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Contents Single Gang Keypads: CNX-B2/B4/B6/B8/B12 1 Introduction......................................................................................1 Features and Functions ..........................................................1 Specifications.........................................................................3 Physical Description ..............................................................4 Industry Compliance...............................
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Introduction Features and Functions The CNX-B2/B4/B6/B8/B12-series Single Gang Keypads are wallmounted user interfaces that can be part of a Crestron solution total control system. The keypads are standard Cresnet® devices, and provide fingertip control when the control system is properly programmed using SIMPL Windows. The number in the product’s name corresponds to the number of buttons on the panel.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 The keypads feature backlit-capable ergonomic buttons and are designed for wall mounting in a standard single-gang electrical box. The keypad’s colors and finishes can be used to accent a home’s colors, wall coverings, or décor. NOTE: The CNX-B12 keypad is supplied with 12 blank pushbuttons. As an option, custom-engraved keys can be designed and obtained by using the Crestron Engraver software. Version 2.0.1.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Specifications The following table provides specifications for the keypads. Specifications for the Keypads SPECIFICATION Power Requirements Default Network ID Temperature Sensor Type Precision Accuracy Range LED Type Backlight Type Wave File Format/Size Limit DETAILS 3 Watts (0.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 4. The latest software versions can be obtained from the Downloads | Software Updates section of the Crestron website (www.crestron.com). Refer to the NOTE following these footnotes. 5. Crestron 2-Series control systems include the AV2, CP2/CP2E, MP2/MP2E, PAC2, PRO2 and RACK2. 6. CNX update files are required for either CNMSX-AV/Pro or CNRACKX/-DP. Filenames for CNX update files have a UPZ extension, and ST-CP files are in one EXE or zipped UPZ file.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Keypad Physical Views 12-button Model (White Color) 8-button Model (Black Color) Keypad Overall Dimensions Side View Front View 1.536 in (3.902 cm) 2.912 in (5.568 cm) 1 2 4.762 in (12.096 cm) 12 Buttons 1-12 LED window 1.067 in (2.710 cm) NOTE: Illustration is for 12-button keypad, other models have fewer buttons. Button numbers are for programming purposes only. Refer to the illustrations on page 19 for more button arrangement details.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Button Unit Detail View Front View with buttons removed Back View 1.788 in (4.541 cm) 1.696 in (4.301 cm) TOP Speaker 4.158 in (10.56 cm) 2.696 in (6.848 cm) NET Cresnet port 24 Y Z G Rubber Membrane Indicator LED Installation View Single gang electrical box (2.5 in. depth recommended) Button unit Removable buttons Faceplate 1 in. pan head LED window Divider 6 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Industry Compliance As of the date of manufacture, the keypads have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling (N11785). NOTE: This device complies with part 15 of the FCC rules.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Resistance Equation R < 40,000 L x PF Where: R = Resistance (refer to table below). L = Length of run (or chain) in feet. PF = Power factor of entire run (or chain). The required wire gauge should be chosen such that the resistance value is less than the value calculated in the resistance equation. Refer to the table below. Wire Gauge Values RESISTANCE (R) WIRE GAUGE 4 16 6 18 10 20 15 22 13 Doubled CAT5 8.
Crestron CNX-B2/B4/B6/B8/B12 Refer to the note on page 22 for a definition of Viewport. Single Gang Keypads The NET ID of the keypad has been factory set to 60. The NET IDs of multiple keypads in the same system must be unique. NET IDs are changed from a personal computer (PC) via the Crestron Viewport. NOTE: For detailed information on establishing communication between the PC and control system, refer to “Communication Settings” on page 23.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 5. Select the new NET ID for the keypad from the Choose the new network ID for the selected device (Hex): text box. 6. Click Set ID to initiate the change. This will display the "ID command has been sent" window. 7. In the "Command Complete" window, click OK. 8. In the Current Network Devices text window, verify the new NET ID code. 9. In the "Set Network ID" window, click Close.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads all TSID-enabled devices found, as shown in the figure below. • This information is similar to the report produced by pressing F4 (Report Network Devices); the first eight digits of each line constitute the TSID number (hexadecimal form of the serial number). Set Net ID by TSID Window Serial Number to TSID Conversion If you know the device serial number, but not its TSID number, or you know the TSID but not the serial number, do the following: 1.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Serial Number to TSID Conversion Tool Window 3. Enter the serial number or TSID number as instructed; press the appropriate button to obtain the corresponding number. Installation The following tools/hardware are required for installation: • Cresnet network cable (not supplied) • Phillips screwdriver (not supplied) • Two 1 in.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads CAUTION: Excess wire pinched between the keypad and electrical box could short out. Make sure that all excess wire is completely inside the electrical box and not between the box and the keypad. 4. 5. Make sure button unit is oriented as marked with arrow at top, and place it in the electrical box. Attach button unit using the supplied 1 in. pan head screws. 6. Attach buttons with LED window oriented upward to match each LED indicator. 7.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Programming Software Have a comment about Crestron software? Direct software related suggestions and/or complaints to Crestron via email (software@ crestron.com). Do not forward any queries to this address. Instead refer to “Further Inquiries” on page 34 for assistance. Setup is easy thanks to Crestron’s Windows-based programming software. The Crestron Application Builder™ (Appbuilder) creates a complete project, with no special programming required.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads The following are the earliest useable software version requirements for the PC: • (Optional) Application Builder version 1.0.17 or later. Requires SIMPL Windows. • (Optional) D3 Pro version 1.0 or later. • SIMPL Windows version 2.01.05 or later. Requires SIMPL+® Cross Compiler version 1.1. • VT Pro-e version 2.4 or later. • Crestron Database version 15.7.2 or later. • (Optional) Crestron Engraver version 2.0.1.5 or later.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 a number of workspaces (i.e., windows) in which a programmer can select, configure, program, test, and monitor a Crestron control system. SIMPL Windows offers drag and drop functionality in a familiar Windows environment. This section explains how to create a SIMPL Windows program that includes a single gang keypad. Configuration Manager is where programmers “build” a Crestron control system by selecting hardware from the Device Library.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads NOTE: The first CNX-B12 in a system is preset with a NET ID of 60 when its symbol is dragged into the upper pane of System Views. Additional units are assigned different NET ID numbers as they are added. C2Net Device, Slot 9 Setting the Net ID in Device Settings Double-click the CNX-B12 icon in the upper pane to open the “Device Settings” window. This window displays CNX-B12 device information.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 NOTE: This procedure sets the NET ID for the CNX-B12 in the program only. It does not automatically set the NET ID for the keypad itself. SIMPL Windows automatically changes NET ID values of a device added to a program if a duplicate device or a device with the same NET ID already exists in the program. Always ensure that the hardware and software settings of the NET ID match. For NET ID hardware setting details, refer to “Identity Code” on page 8.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads NOTE: In the symbol, the number of press and fbck (feedback)—outputs and inputs, respectively—correspond to the number of buttons in a given keypad. For example, a CNX-B8 has press1-8 and fbck1-8 only in its symbol. The illustration below shows the button arrangement for the keypads Button Arrangement of CNX-B Series Keypads (Front Views) Operations & Installation Guide - DOC.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 The following two tables list the symbol inputs and outputs, respectively, and their functional descriptions. NOTE: All signals listed in the tables are DIGITAL unless noted. A digital signal can be high (logic level of 1) or low (logic level of 0), and have rising edge (low to high) transitions, and falling edge (high to low) transitions. CNX-B12 Symbol Input Signal Descriptions INPUT fbck1 thru fbck12 DESCRIPTION Activates feedback LEDs 1-12.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads CNX-B12 Symbol Output Signal Descriptions OUTPUT DESCRIPTION press1 thru press12 Notifies control system of button press (1-12). High/1=press On Low/0=press Off PlayingSound Notifies control system that sound file is playing. High/1=playing Low/0=not playing Temp(x10) (analog) Reports ambient temperature every 2 seconds (Enable_Temp_Rpt must be High/1). Units are tenths of a degree, e.g. 685 is 68.5 degrees.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 These files can be stored into and programmed for use in the keypad directly or may be edited with the Sound Recorder. For example, the individual files can be combined to create custom messages. To play WAV files, a CNX-B12 project must be created in VT Pro-e (with the WAV files and correct join numbers as part of the project). NOTE: If you need to create WAV files, refer to Windows Help (Using Sound Recorder).
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads new features are developed after product releases. In those instances, one has the option to upload via the programming software or to upload and upgrade via the Crestron Viewport. NOTE: The Crestron Viewport is available as a pull-down command from SIMPL Windows and VT Pro-e (Tools | Viewport), or as a standalone utility.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Guide (Doc. 6052) or the respective Operations Guide for the control system. These documents are available from the Downloads | Product Manuals section of the Crestron website (www.crestron.com). Refer to the figure below for a typical connection diagram when uploading files. Note: Use a standard DB9 male to female “straight-through” cable. Typical Connection Diagram when Uploading 1. Start SIMPL Windows. 2.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Setup | Communications Settings Command 4. Select RS-232 as the connection type. Verify that an available COM port (COM 1 is shown after this step) is selected, and that all communication parameters and necessary options from the “Port Settings” window are selected as shown after this step. Click the OK button to save the settings and close the window. Operations & Installation Guide - DOC.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 “Port Settings” Window NOTE: The parameters shown in the illustration above are the port settings for a 2-Series control system. Consult the Operations Guide for the control system being used for exact parameter selection. 5. To verify communication, select Diagnostics | Establish Communications (Find Rack). This should display a window that gives the COM port and baud rate.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Uploading a SIMPL Windows Program . A control system source file has the extension .smw. A compiled SIMPL Windows file has the extension .spz for a 2-Series control system, .bin for CNX generation, and .csz for CNX generation with SIMPL+. The SIMPL Windows file can be uploaded to the control system using SIMPL Windows or via the Crestron Viewport. Upload via SIMPL Windows 1. Start SIMPL Windows. 2.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 “Send Program” Window 4. To verify that the program has been transferred successfully, select Diagnostics | Report Program Information. This should display a window that provides details about the current program loaded into the control system. Uploading a VT Pro-e WAV File Project The CNX-B12 keypad source file has the extension .vtp. A compiled VT Pro-e file has the extension hex.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads File Transfer | Send Touchpanel Command 3. As shown after this step, select the NET ID of the CNX-B12 keypad and then click OK. The “Open” window appears (refer to graphic below). “Select Network ID” Window NOTE: When transferring any Cresnet file (keypad project/firmware), lower the port speed baud rate to 38400 to match the Cresnet bus speed. “Open” Window Operations & Installation Guide - DOC.
Single Gang Keypads 5. Crestron CNX-B2/B4/B6/B8/B12 Select the VT Pro-e (hex) file and click Open. The transfer will complete automatically. Firmware Upgrade A firmware upgrade file has the extension .csf. To take advantage of all the CNX-B12 features, it is important that the unit contains the latest firmware available. Please check the Crestron website (http://www.crestron.com/downloads/software_updates.asp) for the latest version of firmware.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads “Select Network ID” Window NOTE: When transferring any Cresnet file (touchpanel project/ firmware), lower the port speed baud rate to 38400 to match the Cresnet bus speed. “Open” Window NOTE: Firmware upgrades to the button panel include two files, [filename]a.csf and [filename]b.csf. Select the ‘a’ file to begin the upload; the ‘b’ file is loaded automatically. 4. Browse to the desired [filename]a.csf file and click Open to begin the transfer.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Serial Number Assignment These procedures are to be used for keypads that just received a firmware upgrade enabling TSID support where it was not previously available. 1. Open the Crestron Viewport. 2. From the Viewport menu, select Functions | Assign Serial Number. The “Serial Number Assignment” window appears. Serial Number Assignment Window 3. Enter the device serial number exactly as it appears on the device label. 4.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. Keypad Troubleshooting TROUBLE POSSIBLE CAUSE(S) Keypad does not function when a button is pressed. Incorrect power supply. Keypad is not receiving power. Keypad Net ID is not correct.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 Further Inquiries If, after reviewing this Operations and Installation Guide for the single gang keypads, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team in your area. Dial one of the following numbers. • In the US and Canada, call Crestron's corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12 This page intentionally left blank. 38 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC.
Crestron CNX-B2/B4/B6/B8/B12 Single Gang Keypads This page intentionally left blank. Operations & Installation Guide - DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide - DOC. 8173A 03.03 Specifications subject to change without notice.
