User Guide

Professional Audio Distribution Processor Crestron CNX-PAD8
12 •• Professional Audio Distribution Processor: CNX-PAD8 Operations Guide - DOC. 8137
Analog initialize symbol S-2 receives the source select signal from the touchpanel
(A) and outputs analog signal room_1_source. This signal is routed to the
CNX-PAD8 (E) and the symbols that are used to illuminate the front panel LED (F).
A room_1_off signal from the touchpanel turns the source selection signal off.
Detail View of Source Select Module (S-2) in SIMPL Windows’ Programming Manager
Symbols S-6 and S-7 illuminate the CNX-PAD8 front panel LED for the
corresponding room that is enabled to receive audio. The room audio source
selection signal (F), from the S-2, causes S-6 to signal S-7 that a source is selected
by room 1. NOT symbol S-7 sends the signal to illuminate the front panel LED (E).
Detail View of Illuminate Room LED Symbols (S-6 and S-7) in SIMPL Windows’
Programming Manager