Specifications

CAT5 Audio Distribution Processor Crestron CNX-BIPAD8
12 • CAT5 Audio Distribution Processor: CNX-BIPAD8 Operations Guide – DOC. 8160B
Foot Placement for the CNX-BIPAD8
NOTE: No more than two CNX-BIPAD8 units should be stacked.
Hardware Hookup
Make the necessary connections as called out in the illustration that follows this
paragraph. Refer to “Network Wiring” on page 10 before attaching the 4-position
terminal block connector. Apply power after all connections have been made.
When making connections to the CNX-BIPAD8, remember to use Crestron power
supplies for Crestron equipment.
Hardware Connections for the CNX-BIPAD8
NOTE: Ensure the unit is properly grounded.
NOTE: The CNX-BIPAD8 can only be powered by the 4-position terminal block
connector labeled NET.