Crestron CNX-PBVR4 Professional Balanced Video Receiver Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2002 Crestron Electronics, Inc.
Crestron CNX-PBVR4 Professional Balanced Video Receiver Contents Professional Balanced Video Receiver: CNX-PBVR4 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron CNX-PBVR4 Professional Balanced Video Receiver Professional Balanced Video Receiver: CNX-PBVR4 Introduction Features and Functions The CNX-PBVR4 Professional Balanced Video Receiver is designed to accept up to 16 channels of differential (balanced) video and digital audio from the Crestron Room Solution Boxes (CNXRMC or CNXRMCLV) and provide single-ended (unbalanced) video and digital audio to the Crestron Video Distribution Switch (CNX-PVID8x3 or 8x4) for redistribution to other room boxes or
Professional Balanced Video Receiver Crestron CNX-PBVR4 Specifications Specifications for the CNX-PBVR4 are given in the following table. CNX-PBVR4 Specifications SPECIFICATION DETAILS Power Requirements 24 VDC, 1A, 24W (Power Pack, PW-2410, included) Video Signal Type Composite Video S-Video Component Video S/PDIF Digital Audio Unity 50 MHz Gain Bandwidth CAT5 Input Cable Length from CNXRMCLV Up to 300 feet maximum.
Crestron CNX-PBVR4 Professional Balanced Video Receiver Ports, Controls, and Indicators The CNX-PBVR4 has a single LED power indicator (PWR) on the front panel to indicate when DC power is applied to the unit; all video signal ports and controls are located on the rear panel. NOTE: This unit is a non-Cresnet device.
Professional Balanced Video Receiver Crestron CNX-PBVR4 RCA Connectors These four gold-plated RCA connectors provide flexibility to output component, composite, and S-Video, along with digital audio for a variety of configurations required by the local equipment in the room. The four groups combined expand that flexibility, allowing for the simultaneous distribution of at least one of every video format.
Crestron CNX-PBVR4 Professional Balanced Video Receiver Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking and standards per EMC and Radio Communications Compliance Labeling (N11785) NOTE: This device complies with part 15 of the FCC rules.
Professional Balanced Video Receiver Crestron CNX-PBVR4 Ear Attachment for Rack Mounting 1. Using a Phillips screwdriver, remove the three side screws closest to the front panel. 2. Position a rack ear so that its mounting holes align with the vacated holes, and secure the ear to the unit with the three longer screws supplied with the ears. 3. Repeat the procedure to attach the remaining ear to the opposite side.
Crestron CNX-PBVR4 Professional Balanced Video Receiver Typical Hookup Connections for the CNX-PBVR4 ROOM CONTROLLERS HEADEND Room 1 Local Monitor/TV Local Video Source Unbalanced Video CAT5 In CNXRMCLV Out In Unbalanced Video Local Monitor/TV Unbalanced Video Unbalanced Video/Digital Audio A B RCA (X4) RCA (X4) In CNX-PBVR4 CAT5 CAT5 C D RCA (X4) Out RCA (X4) In CNXRMCLV CAT5 CAT5 CAT5 Room 2 Local Video Source Balanced Video/Digital Audio Unbalanced Video Out CNXPVID8x4 In
Professional Balanced Video Receiver Crestron CNX-PBVR4 Sample of Multi-Burst Pattern NOTE: For S-video and component video sources, be sure to adjust the pot for luminance compensation first (VIDEO INPUT COMP 1). The pots for chrominance compensation should be adjusted last. 3. While the pattern is being displayed on the monitor, use the screwdriver to adjust the VIDEO INPUT COMP 1 compensation pot until the line intensity on the monitor appears uniform. 4.
Crestron CNX-PBVR4 Professional Balanced Video Receiver Problem Solving Troubleshooting In the event of poor quality or missing signal output at one or more distribution points supplied by circuits that include the CNX-PBVR4, and troubleshooting procedures for the other devices in the network do not resolve the problem, do the following: 1. Verify existence of input signals(s) from the CNXRMCLV. 2.
Professional Balanced Video Receiver Crestron CNX-PBVR4 Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron CNX-PBVR4 Professional Balanced Video Receiver This page intentionally left blank. Operations Guide – DOC.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 8184 08.02 Specifications subject to change without notice.
