CRESTRON Contents 3-Card Expansion Cage: CNXCAGE 1 Description .......................................................................................................................... 1 Functional Description ........................................................................................... 1 Physical Description............................................................................................... 1 Installation..........................................................................
CRESTRON 3-Card Expansion Cage: CNXCAGE Description Functional Description The CNXCAGE is an optional feature designed specifically for Crestron’s CNMSX-AV integrated control system. The field-upgradable unit offers three internal expansion slots to enhance and add versatility to the existing control system. Physical Description The CNXCAGE, shown below, is a box-like unit that fits into a CNMSX-AV. Two blank plates are attached to the CNXCAGE when shipped.
CRESTRON Installation Items required to install the CNXCAGE are either attached to the unit or already reside on the CNMSX-AV. Below is a list of all the pieces needed and the quantities required. The only tools required are a phillips tip screwdriver and a grounding strap. Follow the assembly procedure and illustrations that follow this paragraph.
CRESTRON 3. Lift and remove CNMSX-AV top cover . CNXCAGE Installation (2 of 4) 4. Remove four screws that secure cover plate to CNMSX-AV. 5. Remove cover plate 6. Turn CNMSX-AV onto its side and remove two screws , and two washers from the underside of the unit. . , two nuts CNXCAGE Installation (3 of 4) 7. Operations & Installation Guide - DOC. 8119 Attach the supplied cable assembly to the P1 connector on the CNXCAGE .
CRESTRON appropriate connector. There is no danger of improperly connecting the CNXCAGE. 8. Reposition the CNMSX-AV right-side-up on a flat surface and insert the CNXCAGE with attached cable assembly into the CNMSXAV through the opening at the top and side of the unit. 9. Attach the cable assembly CPU. 10. Secure the CNXCAGE two screws . to the P3 connector on the CNMSX-AV to the CNMSX-AV with four screws and CNXCAGE Installation (4 of 4) 11. Secure CNMSX-AV top cover .
CRESTRON Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron technical support representative; refer to “Further Inquiries” on page 5. CNXCAGE Troubleshooting TROUBLE Expansion card inserted into CNMSX-AV is not functioning. POSSIBLE CAUSE(S) CORRECTIVE ACTION Follow installation procedures in this Damaged pin on the CNXCAGE P1 or CNMSX- guide and inspect connector pins. AV P3 connector.
CRESTRON Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
