User Guide

CRESTRON
2 •• 3-Card Expansion Cage: CNXCAGE Operations & Installation Guide - DOC. 8119
Installation
Items required to install the CNXCAGE are either attached to the unit or already
reside on the CNMSX-AV. Below is a list of all the pieces needed and the quantities
required. The only tools required are a phillips tip screwdriver and a grounding
strap. Follow the assembly procedure and illustrations that follow this paragraph.
Items Required to Install the CNXCAGE
ITEM # ITEM PART NUMBER QUANTITY
1 Screw #6-32 x 0.25" LG 4
2 Screw #6-32 x 0.375" LG 12
3 CNMSX-AV Top Cover Not Applicable 1
4 Screw #6-32 x 0.375" LG 4
5 CNMSX-AV Cover Plate Not Applicable 1
6 Screw #6-32 x 0.375" LG 2
7 Nut #6-32 2
8 Washer #6 2
9 Cable Assembly 15743 1
10 CNXCAGE ZA11051 1
CAUTION: The CNMSX-AV must be opened to install the CNXCAGE. To
prevent electric shock, disconnect the line cord before opening the unit. Observe
precautions for handling electrostatic sensitive devices (ESDs).
NOTE: It is assumed that the CNMSX-AV rack ear brackets are not attached
during this installation procedure.
CNXCAGE Installation (1 of 4)
1. Place the CNMSX-AV right-side-up on a flat surface and remove four
screws from the top of the unit.
2. Remove 12 screws from both sides of the CNMSX-AV. There are 6
screws per side.