Crestron CNXRMIRD Infrared Detector Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc.
Crestron CNXRMIRD IR Detector Contents Infrared Detector: CNXRMIRD ....................................... 1 Description ........................................................................ 1 Functional Description ............................................. 1 Physical Description................................................. 1 Setup.................................................................................. 2 Leading Specifications ......................................................
Crestron CNXRMIRD IR Detector Infrared Detector: CNXRMIRD Description Functional Description The Crestron Infrared (IR) Detector (CNXRMIRD) is used by Crestron's CNXRMC (Room Solution Box) and CNXRMCLV (Room Solution Box with Local Video) to detect fixed low frequency (38KHz) type IR formats generated by typical hand-held remote devices. Commands received by the detector can either be processed locally to control video or audio, or sent to a host control system.
IR Detector Crestron CNXRMIRD CNXRMIRD, Physical Views 1.00 in (2.51 cm) 1.00 in (2.51 cm) 1.00 in (2.51 cm) 6 ft (1.89 m) Setup Plug the mini phone jack into the IR IN port on the CNXRMC or CNXRMCLV, and place the IR receiver in a convenient location free of obstructions to receive IR signals. Secure it with the supplied dual lock fasteners. CNXRMC, IR IN Port CONNECT TO CNXRMIRD RS-232 IR IN NET IR OUT A B C SENS PWR NET SETUP 24 Y Z G D C R E S T R O N E L E C T R O N IC S I N C .
Crestron CNXRMIRD IR Detector Example The following is an example of a typical CNXRMIRD connection as part of a Crestron control system.
IR Detector Crestron CNXRMIRD Leading Specifications The table below provides a summary of leading specifications for the CNXRMIRD. Leading Specifications of the CNXRMIRD SPECIFICATIONS DESCRIPTION Dimensions and IR Detector Housing Weight Height: 1.00 in (2.54 cm) Width: 1.00 in (2.54 cm) Depth: 1.00 in (2.54 cm) Weight: 0.15 lb (0.055 kg) Cable and Mini Jack Length: 6.00 ft (1.
Crestron CNXRMIRD IR Detector Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CNXRMIRD Troubleshooting TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION Verify that No response from Universal remote is not commands sent to communicating with the CNXRMIRD is connected to IR IN CNXRMC or CNXRMC or port on the CNXRMC CNXRMCLV. CNXRMCLV. or CNXRMCLV.
IR Detector Crestron CNXRMIRD Further Inquiries If after reviewing this Operations Guide, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016. • In Latin America, call Crestron Latin America at +5255-5093-2160.
Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations Guide – DOC. 8165 03.02 Specifications subject to change without notice.
