User Guide

Crestron CNXTA CNX Telephone Audio Interface Card
To Create WAV Messages from Individual Files
NOTE: To create CNXTA messages by combining individual WAV files, the PC
must be equipped with audio capabilities. Multimedia speakers are recommended for
an audio review of the created message.
NOTE: The maximum time length of any individual WAV file message is
approximately four (4) minutes. However, the CNXTA may be programmed to play
multiple files consecutively for longer messages.
NOTE: Although there are alternative methods for selecting the commands of the
application, the following procedure uses the PC mouse and pull-down Menu Bar.
To create CNXTA messages from individual WAV files, perform the following
procedure:
1. At the Windows taskbar, select Start
| Programs | Accessories. For
Windows 95/NT, select Multimedia
, for Windows 98, select
Entertainment
. Select Sound Recorder and the Sound Recorder
opens as shown below.
Open Sound Recorder
2. Select File
| New as shown below.
Create New File to Create Message
Operations & Installation Guide - DOC. 8144A CNX Telephone Audio Interface Card: CNXTA • 9