Specifications

CRESTRON
NOTE: When connecting the CNXVGA to the VT-3500L, it may be useful to add a
right angle adapter (part number 351A505, BoMar or equivalent, not supplied) to the
BNC connectors of the VT-3500L, labeled VIDEO. Doing so, may make installation
of the unit into tight locations easier.
CNXVGA Hookup Connections with VT-3500L
NOT
USED
CONNECT TO
VIDEO PORT
ON VT-3500L
CONNECT TO
ANY RGB SOURCE
CONNECT TO
VIDEO SOURCE
CONNECT TO
CONTROL SYSTEM
CONNECT TO
NET PORT
ON VT-3500L
The only tool required to mount the CNXVGA to the VT-3500L is a Phillips tip
screwdriver. As shown after this paragraph, the CNXVGA can be mounted directly
onto the back side of a VT-3500L using two screws that are already attached to the
touchpanel.
Mounting the CNXVGA to a VT-3500L
Operations Guide - DOC. 8134A Expanded Video Adapter: CNXVGA • 7