User Guide

CRESTRON
Leading Specifications
The table below provides a summary of leading specifications for the CNXVGA.
Dimensions and weight are rounded to the nearest hundredth unit.
Leading Specifications of the CNXVGA
SPECIFICATION DETAILS
Power Requirements
24 VDC, network power; 7.5 Watts
Maximum Rate
XGA at 72 Hz
Flash Memory
Stores parameters for up to 25 formats
Default Network ID
38
CNXVGA Firmware
Version 1.26 or higher
SIMPL Windows
Version 1.21.04 or later
CNX Operating System
Version 5.01.00 or later
CNX Monitor
Version 2.00 or later
CNMS, CNRACK, CNLCOMP
Operating System
Version 3.16.08 or later
ST-CP Operating System
Version 4.00.29 or later
ST-CP Monitor
Version 1.29 or later
Dimensions
Height: 7.54 in (19.15 cm)
Width: 4.16 in (10.57 cm)
- excluding connectors
Depth: 1.27 in (3.22 cm)
Weight
0.47 lb (0.21 cm)
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Installation
Equipment
The CNXVGA is provided without any connecting cables; they must be purchased
separately. Here are some suggested cable accessories for CNXVGA applications.
Suggested Cables for the CNXVGA
CONNECTION
PORT MANUFACTURER MODEL DESCRIPTION
RGB IN Extron VGA-M6'HR 15-pin HD VGA Male to VGA Male
RGB IN Extron SYVGA/XGA VGA Male to 5 BNCs
4 Expanded Video Adapter: CNXVGA Operations Guide - DOC. 8134A